|
Twin hose balancer
ST-30 Twin hose balancer By ENDO
Model, ST-30 is available for
a feed back tool, namely for fastening counter. Detecting human
error and fastening troubles is coming to be important. So far,
twin coil hoses are used for such the air tool. NOW this new hose
balancer can be connected with a feed back air tool directly and
installing this equipment on the line makes the application simple.
Finally coil hose problem will be cleared.
Features
- Fall arrest system against spring breakage is available.
- Safe tension adjustment is provided by warm gear system.
- Incorporated joints are equipped for main and counter air, which
make fault detection and counting possible.
- A small tube for counter air is passing through a large hose of
inner dia. 8.9mm inside.
- High endurance based on high quality
Specification
|
Model
|
Capacity
(kg)
|
Hose travel
|
Mass
(kg)
|
|
ST-30
|
1.0-3.0
|
1.3m
|
2.8
|
When the balancer is used as a retractor, max. capacity
should be limited to 2.5kg
Hose size - Outside hose 8.9 mm x 12.2mm - Inner tube 2.5 mm x
4.0 mm
*Two air inlets and two air outlets are provided for air/air
feed back tools. The tool hose balancers are not available for
air / electric feed back tools.
|
